Invited Speakers
Xianbin Huang
Associate Professor, School of Petroleum Engineering, China University of Petroleum (East China), ChinaSpeech Title: Introduction to High Temperature Resistant Polymers Used in Drilling Fluid for Deep and Ultra-deep Well Drilling
Abstract: With the gradual depletion of shallow oil and gas resources, deep (>4,500m) and ultra-deep (>6,000m) oil and gas have become the main sources of oil and gas resources in China. With the advancement of technology, the drilling depth has been gradually increased. Two extra-deep wells with a design depth of over 10,000 m are being drilled in China. One of the wells has exceeded 10,000 m. However, the high temperature in the deep formation poses a great challenge to the temperature resistance of drilling fluids. Water-based drilling fluids (WBDF) are multistage dispersion systems of clay, weighting agent and a variety of chemical materials in water. Drilling fluid serves as “drilling blood” and plays a vital role in carrying and suspending drill cuttings, stabilizing wellbores, and lubricating and cooling drill bits during drilling-based engineering. Water-soluble polymers mainly regulate rheology and control filtration in drilling fluids, but their performance fails under high-temperature and high-salt conditions, which is a serious problem for drilling safety and efficiency. This presentation will focus on the topic of high temperature resistant polymers used in the drilling fluid. It will cover the technical challenges of deep well drilling, the challenges for polymers and the current status of research on high temperature resistant polymers. Finally, some research results on high temperature resistant polymers from our team will be presented.
Juan Guan
Associate Professor, School of Materials Science and Engineering, Beihang University, ChinaSpeech Title: Robust Biodegradable Fiber Silk Composites For Load-bearing Bone Graft
Abstract: Degradable biomaterials have emerged as a viable alternative to permanent materials for regenerative bone medicine. Although Polycaprolactone (PCL) exhibits remarkable extensibility and toughness, its low elastic modulus and strength, hydrophobicity, and excessively slow degradation rate limit its application in orthopedics. Natural silk fibers with macroscopic continuity and highly ordered morphology are selected to reinforce PCL to satisfy the mechanical and biological requirements for bone grafts. In this talk, we discuss the design, fabrication, and bone graft application of fiber silk-PCL biocomposites.
Silk-PCL composites with 20%/40%/60% silk were fabricated via layer-by-layer assembly and hot-pressing, allowing facile incorporation of drugs. The fiber silk composites exhibited compatible modulus (1GPa) to the majority of bone tissues, high compressive strength (150MPa), high toughness, hydrophilicity, and water adsorption behavior. The 6-month in vitro degradation experiment showed that passive surface erosion and bulk hydrolysis of the silk-PCL composite by the aqueous environment is negligible, and the fiber-matrix interfaces remained robust. In the in vivo rat subcutaneous model, the degradation of silk composites is significantly accelerated via inflammatory cells mediated PCL dissolution from the surface. Fiber silks are proposed to modulate the inflammatory responses toward synchronized material degradation and tissue reconstruction. A rabbit tibial defect model shows a strong tissue-composite implant bonding, suggesting sufficient mechanical function and the regeneration of new bone.
The silk-PCL composites bring forward exceptional comprehensive mechanical performance and desirable degradation behavior in vivo through the coupled inflammatory modulation effects of silk and PCL. This work may herald the advent of a novel biomaterial for load-bearing bone repair.
Jixi Zhang
Professor (Biomaterials), Chongqing University, Chongqing, ChinaSpeech Title: Composite Materials for Perioperative Tumor Diagnosis/Treatment by Coupled Control of Cascade Reaction Flow and Transfer at Interface
Abstract: Perioperative diagnosis and residual focus clearance are difficult problems for solid tumors such as triple negative breast cancer. Polymer-based composite nanoparticles can drive or assist physicochemical reactions and biological effects in diagnostic processes, but multiphase reaction flow transfer and kinetic control are important challenges to improve response efficiency and specificity. Our group makes full use of melanin-like materials with synergistic molecular mode (based on phenol-quinone redox) and optical mode (based on electromagnetic effects of conjugated structures) to develop new composite materials. Aimed at two key scientific problems of " response modulation method for interface coupling and distance constraint of diagnosis and treatment elements" and "balancing engineering mechanism of confined activation and cascade transformation of active species", biochemical identification-response-amplification mechanisms and balancing engineering of active species are cross-fused in function transfer-synergy systems of composite nanomaterials. Homogeneous photoelectrochemical sensors for the detection of miRNA markers in tumor interstitial fluid with high reproducibility were developed by employing electron transfer cascade constrained by interface collision. Complex catalytic structures empowered with elementary transfer and efficient pore diffusion were designed to achieve a catalytic oxidation therapy system that efficiently overcomes tumor cell resistance. An interface-oriented control model and regulation paradigm for oxidative polymerization of melanin-like nanoparticles was established to develop a "contradiction complex" material that meets ROS balance engineering and inflammation control after phototherapy. The activity of infiltrated immune cells after activation and the efficiency of metastasis and recurrence inhibition was effectively enhanced. Finally, the key technical problem of "high-performance biosensor and combined ablation therapy driven by endogenous microenvironment and active materials" was broken through, and functional material construction strategies that accurately adapted to the complex response network modulation of the diagnosis and treatment process were formed. The above perioperative tumor auxiliary diagnosis and treatment materials with high efficiency and specificity, transmission coupling and material energy conversion flow synergy provide innovative solutions for the construction of intelligent nano-diagnosis and treatment systems.
Keywords: Composite Nanoparticles; Tumor Theranostics; Interfacial Processes; Catalysis Control; Cell Response
Acknowledgements: The work was supported in part by the National Natural Science Foundation of China (NSFC, grant nos. 22175027 and 21734002), the Natural Science Foundation of Chongqing (cstc2021jcyj-cxttX0002 and cstc2021jcyj-msxmX0178), project no. 2023CDJXY-051 supported by the Fundamental Research Funds for the Central Universities, and the 100 Talents Program of Chongqing University (J.Z.). The Analytical and Testing Center of Chongqing University is greatly acknowledged for helping with the characterization of materials.
Alakkumar Patra
Senior Lecturer, School of Civil Engineering, The Papua New Guinea University of Technology, Lae, Morobe, Papua New Guinea (PNG Unitech)Speech Title: Investigation on laminated polymer composite reinforced with unidirectional carbon fiber prepreg
Abstract: Damage characteristics of polymer composite layer reinforced with unidirectional carbon prepreg tape is analysed under different tensile loading conditions. Modelling and simulation are performed using ABAQUS (standard) software. One end of the specimen is fixed and the other end is free where tensile loads are applied. The displacement profile is presented in Fig. 1 and the load -displacement plot is shown in Fig.2. It is evident from the load-deformation plot that at the initial part, relationship is linear. The stress at different zones is different and is an expected one for typical nature of such fibrous composites. This is a part of a bigger project with experimental investigation (Fig. 3) and is expected in full paper for possible publication.
Keywords: Carbon-prepreg-tape, epoxy resin, Unidirectional fiber, fixed-free, numerical-experimental.
Fig. 1 Displacement profile
Fig. 2 Load displacement plot
Fig. 3 Experimental setup
Updated soon...